360 Video settings – Mushihimesama HD

360 Video settings – Mushihimesama HD

I just updated my 360 Video settings page with Mushihimesama HD (scroll down to the bottom). I also noticed (with this game)that at least using the Ultracade Universal Video Converter, the backgrounds will wobble (tearing) terribly unless SMOOTHING is enabled. I don't know if you'll get the wobble if you use a native 480p (or higher) display, but you might give the SMOOTHNESS setting a try if you have issues. I wanted to add video settings for Under Defeat HD as well, but the 4:3 mode is currently in need of an update patch so I feel I want to wait and see what'll happen....
Read More
Ultracade Universal Video Converter

Ultracade Universal Video Converter

What it does The Ultracade Universal Video Converter, or UVC for short, can convert a high res video signal into an arcade monitor compatible RGBS signal. In 15kHz or in 24kHz. There are other ways of hooking up a high res source to an arcade cabinet like this, but no other can output to 24kHz (AFAIK).  From the manual: " This is a very simple board that has only one function, to allow the display of PC based games on older arcade style monitors. The board needs to be an external device that requires no modification to the software running on the PC. It will handle one of three input resolutions (1024x768, 800x600 or 640x480) with a vertical refresh rate of 60Hz and output to one of two user selectable output modes (640x240@15.72KHz)...
Read More
2011-01-27

2011-01-27

Today I got my hands on something that's very cool. The SLG3000. It's a tiny dedicated unit that produces scanlines for game consoles or emulator setups where you don't have a scanline option in the video settings, or when you don't want to put extra processing strain on your emulator setup. It will accept VGA source video through it's VGA input (female) and output it with added scanlines through it's VGA output (female). This thing doesn't need external power, as the video sources' sync line can make it work anyway. Pretty damn cool. It has some nifty settings that you can access by setting the DIP switches on the unit. For example, you can choose to apply these scanlines to even or odd lines. This comes in handy when you have an interlaced Dreamcast game, as the scanlines can mask this effect leaving you with a flicker/interlace free picture. It can also add that missing "CRT" feeling...
Read More
2010-11-20

2010-11-20

I been making lots of posts over at the shmups forums about the Ultracade Universal Video Converter (discontinued) that I use to display my XBox 360 games in my EGRET II. The thread has lots of useful info on this, so I went ahead and copied all of the useful data over to a new page that I've made here should the info disappear sometime. The original thread got deleted by mistake once, and I don't want to go through with another re-write. Click the banner below to read. ...
Read More