My Guwange HORI stick

My Guwange HORI stick

TURNING TEKKEN 6 INTO GUWANGE INTRODUCTION I found a very cheap HORI Tekken 6 | Game + Artwork book + Arcade stick bundle, but never clicked with the stick or the artwork, so I started working on a fitting artwork, looking at hardware modding possibilities etc. The first thing I did was trying to make the sloppy HORI joystick feel more like the quality parts I'm used to. The easiest way I found someone had come up with was switching out most of the sucky parts for quality parts with just some light hardware modding. By switching out HORI guide to a SANWA JLF octagonal gate (you drill 4 holes in the latter) I felt that the stick handled much better. I then switched out the default microswitches for the stick with the kind used in Seimitsu LS-32, and also used a SANWA JLF spring that I pulled out to twice the original height....
Read More
Ultracade Universal Video Converter

Ultracade Universal Video Converter

What it does The Ultracade Universal Video Converter, or UVC for short, can convert a high res video signal into an arcade monitor compatible RGBS signal. In 15kHz or in 24kHz. There are other ways of hooking up a high res source to an arcade cabinet like this, but no other can output to 24kHz (AFAIK).  From the manual: " This is a very simple board that has only one function, to allow the display of PC based games on older arcade style monitors. The board needs to be an external device that requires no modification to the software running on the PC. It will handle one of three input resolutions (1024x768, 800x600 or 640x480) with a vertical refresh rate of 60Hz and output to one of two user selectable output modes (640x240@15.72KHz)...
Read More